E.g. MBA, MCA, Engineering, Medical, IIM, IIT, etc.  
E.g. Mumbai, Delhi, Bangalore, Pune, USA, UK, etc.
 Home  >  IES Civil Engineering Syllabus

IES Civil Engineering Syllabus 2017

Get information on UPSC IES Civil Engineering Syllabus 2017.

IES Exam


IES Civil Engineering Syllabus for both conventional and objective type questions deals with various concepts of civil engineering right from building material to construction practice and management planning. In this it sums of key concepts of mechanics, structural analysis and design. The IES Civil Engineering Syllabus 2013 is as follows

PAPER-I

1.BUILDING MATERIALS

Timber:-

Different types and species of structural timber, density-moisture relationship, strength in different
directions, defects, influence of defectson permissible stress, preservation, dry and wet rots, codal provisions for design, plywood.

Bricks : Types, Indian Standard classification, absorption, saturation factor, strength in masonry, influence of morter strength on masonry strength.

Cement : Compounds of, different types, setting times, strength.

Cement Mortar : Ingredients, proportions, water demand, mortars for plastering and masony.

Concrete : Importance of W/C Ratio, Strength, ingredients including admixtures, worksability, testing for strength, elasticity, non-destructive testing, mix design methods.

SOLID MECHANICS


Elastic constants, stress, plane stress, Mohr’s circle of stress, strains, plane strain, Mohr’s circle of strain, combined stress; Elastic theories of failure; Simple bending, shear; Torsion of circular and rectangular sections and simple members.

STRUCTURAL ANALYSIS

Analysis of determinate structures - different methods including graphical methods.

Analysis of indeterminate skeletal frames - moment distribution, slopedeflection, stiffness and force methods, energy methods, Muller-Breslau principle and application. Plastic analysis of indeterminate beams and simple frames - shape factors.
.
DESIGN OF STEEL STRUCTURES

Principles of working stress method. Design of connections, simple members, Built-up sections and frames, Design of Industrial roofs. Principles of ultimate load design. Design of simple members and frames.

DESIGN OF CONCRETE AND MASONRY STRUCTURES


Limit state design for bending, shear, axial compression and combined forces. Codal provisions for slabs, beams, walls and footings. Working stress method of design of R.C. members. Principles of prestressed concrete design, materials, methods of prestressing, losses. Design of simple members and determinate structures. Introductions to prestressing of indeterminate structures. Design of brick masonry as per I.S. Codes.

CONSTRUCTION PRACTICE, PLANNING AND MANAGEMENT

Concreting Equipment:-

Weight Batcher, Mixer, vibrator, batching plant, concrete pump. Cranes, hoists, lifting equipment. Earthwork Equipment : Power shovel, hoe, dozer, dumper, trailers and tractor, rollers, sheep foot rollers, pumps. Construction, Planning and Management :
Bar chart, linked bar chart, work-break down structures, Activity - on - arrow diagrams. Critical path, probabilistic activity durations; Event-based networks.
PERT network: Time-cost study, crashing; Resource allocation.

PAPER-II

1. (a) FLUID MECHANICS, OPEN CHANNEL FLOW, PIPE FLOW


Fluid Properties, Pressure, Thrust, Buoyancy; Flow Kinematics; Integration of flow equations; Flow measurement; Relative motion; Moment of momentum; Viscosity, Boundary layer and Control, Drag, Lift; dimensional Analysis, Modelling; Cavitation; Flow oscillations; Momentum and Energy principles in Open channel flow, Flow controls, Hydraulic jump, Flow sections and properties; Normal flow, Gradually varied flow; Surges; Flow development and losses in pipe flows, Measurements; Siphons; Surges and Water hammer; Delivery of Power Pipe networks.

(b) HYDRAULIC MACHINES AND HYDROPOWER

Centrifugal pumps, types, performance parameters, scaling, pumps in parallel; Reciprocating pumps, air vessels, performance parameters; Hydraulic ram; Hydraulic turbines, types, performance parameters, controls, choice; Power house, classification and layout, storage, pondage, control of supply.

2. (a) HYDROLOGY

Hydrological cycle, precipitation and related data analyses, PMP, unit and synthetic hydrographs; Evaporation and transpiration; Floods and their management, PMF; Streams and their gauging; River morphology; Routing of floods; Capacity of Reservoirs.

(b) WATER RESOURCES ENGINEERING

Water resources of the globe: Multipurpose uses of Water: Soil-Plant- Water relationships, irrigation systems, water demand assessment; Storages and their yields, ground water yield and well hydraulics; Waterlogging, drainage design; Irrigation revenue; Design of rigid boundary canals, Lacey’s and Tractive force concepts in canal design, lining of canals; Sediment transport in canals; Non-Over- flow and overflow sections of gravity dams and their design, Energy dissipators and tailwater rating; Design of headworks, distribution works, falls, cross-drainage works, outlets;River training.

3. ENVIRONMENTAL ENGINEERING

(a) WATER SUPPLY ENGINEERING Sources of supply, yields, design of intakes and conductors; Estimation of demand; Water quality standards; Control of Water-borne diseases; Primary and secondary treatment, detailing and maintenance of treatment units; Conveyance of treatment units;Conveyance and distribution systems of treated water, leakages and control; Rural water supply; Institutional and industrial water supply.
(b) WASTE WATER ENGINEERING: Urban rain water disposal; Systems of sewage collection and disposal; Design of sewers and sewerage systems; pumping; Characteristics of sewage and its treatment, Disposal of products of sewage treatment, streamflow rejuvenation Institutional and industrial sewage management; Plumbing Systems; Rural and semi-urban sanitation.
(c) SOLID WASTE MANAGEMENT Source, classification collection and disposal; Design and Management of landfills.
(d) AIR AND NOISE POLLUTION AND ECOLOGY Sources and effects of air pollution, monitoring of air pollution; Noise pollution and standards; Ecological chain and balance, Environmental assessment.

4.(a) SOIL MECHANICS
Properties of soil, classification and interrelationship; Compaction behaviour, methods of compaction and their choice; Permeability and seepage, flow nets, Inverted filters; Compressibility and consolidation; Shearing resistance, stresses and failure; soil testing in laboratory and insitu; Stress path and applications; Earth pressure theories, stress distribution in soil; soil exploration, samplers, load tests, penetration tests.
(b) FOUNDATION ENGINEERING Types of foundations, Selection criteria, bearing capacity, settlement, laboratory and field tests; Types of piles and their design and layout, Foundations on expansive soils, swelling and its prevention, foundation on swelling soils.

5. (a) SURVEYING
- Classification of surveys, scales, accuracy; Measurement of distances direct and indirect methods; optical and electronic devices; Measurement of directions, prismatic compass, local attraction; Theodolites - types; Measurement of elevations - Spirit and trigonometric levelling; Relief representation; Contours; Digital elevation modelling concept; Establishment of control by triangulations and traversing - measurements and adjustment of observations, computation of coordinates; Field astronomy, Concept of global positioning system; Map preparation by plane tabling and by photo grammetry; Remote sensing concepts, map substitutes.

(b) TRANSPORTATION ENGINEER-

ING Planning of highway systems, alignment and geometric design, horizontal and vertical curves, grade separation; Materials and construction methods for different surfaces and maintenance: Principles of pavement design; Drainage.

Traffic surveys, Intersections, signal- ling: Mass transit systems, accessibility, networking. Tunnelling, alignment, methods of construction, disposal of muck, drainage, lighting and ventilation, traffic control, emergency management.

Planning of railway systems, terminology and designs, relating to gauge, track, controls, transits, rolling stock, tractive power and track modernisation; Maintenance; Appurtenant works; Containerisation. Harbours - layouts, shipping lanes, anchoring, location identification; Littoral transport with erosion and deposition; sounding methods; Dry and Wet docks, components and operational Tidal data and analyses. Airports - layout and orientation; Runway and taxiway design and drainage management; Zoning laws; Visual aids and air traffic control; Helipads, hangers, service equipment.

UPSC IAS Exam

Rate this Page

(4 out of 5 based on 6 Ratings)

Posted By: Posted by : Josil Walter. Check out Josil Walter Google+ Profile

Comments / Reviews / Queries

  • I am b.tech ece 2015 pass out student .i want to know cdac syllabus for ece and exam date Posted by : Mohammed ghouse on 04-08-2015 Report Abuse
  • I don't know about DRDO please give me some information about DRDO Posted by : dipika chikhale on 24-07-2015 Report Abuse
  • Next Exam date & sehdule for CTET 2015. Posted by : Vijay Kumar on 21-07-2015 Report Abuse
  • Is there any vacancy for Ph.D. Food Science and technology? Posted by : Sonu Panwar on 17-07-2015 Report Abuse
  • I want to know about fashion designing course! Posted by : Shruti verma on 17-07-2015 Report Abuse
  • I AM PRIMARY TEACHER,IN Z.P.NAGPUR. I WANT TO TAKE ADMISSION IN M.ED .. MY QUALIFICATION IS M.A : B.ED (IGNOU} PLEASE GUIDE ME...... Posted by : Sanghapal T. Meshram on 12-07-2015 Report Abuse
  • I am finished diploma mining in GTU with 8.28 C.G.P.I. & i need job in gipcl. So any job for me??? Posted by : archit vekriya on 07-07-2015 Report Abuse
  • I am competing my Diploma in Electrical branch.Is their any vacancy for fresher diploma. Posted by : Ganesh More on 07-07-2015 Report Abuse
  • How many subjects in Diploma for students after ITI Posted by : Arunkumar H on 29-06-2015 Report Abuse
  • i m Rohit i have completed my BCA from patna M.U. Have you any job for me. i have experience in ms office. Posted by : Rohit on 25-06-2015 Report Abuse
  • I have completed my BBA from HPU,Now i want to doing MBA distance in Finance so please suggest me the proceducer of the Distance MBA Posted by : PANKAJ SHARMA on 16-06-2015 Report Abuse
  • when and from which month the admission forms for Bed 2015 will be availiable at Namchi (Sikkim) Posted by : prayash rai on 11-06-2015 Report Abuse
  • I Want to join for c.s foundation cource. when and how can i join for this? Posted by : savitha k on 10-06-2015 Report Abuse
  • I have completed my MCA from Assam Engineering College under Guwahati Unversity and work experience in JAVA Posted by : Dhiraj Medhi on 07-06-2015 Report Abuse
  • I have done MCA from HPU ,my have made project in php,so is there any job for me in NIC. Posted by : Alka on 29-05-2015 Report Abuse
  • How can i get my son to join your course to train to become a pilot after 10th.Are there any other courses available. Please advice. Posted by : Rajeev Dewan on 07-05-2015 Report Abuse
  • Which are degree courses suitable for science students and better job in fututre ? Posted by : Mani on 25-04-2015 Report Abuse
Click to See more Comments

Post Your Reviews / Comments / Queries

  •  
  • (Your Email and Mobile will not be shared with anyone. It is just for replying to your comments / queries / questions. Your Queries will be answered by the College or Institute or our expert counselors)
  • Verification Code comes here



    Can't see? Refresh!
  • (Max 600 Characters allowed)